Knarr - a class of it's own ... since 1943 and now in the magazine Yacht Classic
| Length: |
9,28 m |
|
Draft: |
1,30 m |
| Beam: |
2,12 m |
|
Displacement: |
2.300 kg |
| |
|
|
Berths: |
max. 4 |
| Sail Area: |
26,6 qm |
|
|
|
|
One Design Keel Boot Knarr – complete assembled - (as specified in the Knarr Class rules)
- Hull, Deck, Cockpit und inner sections made of GRP - Standard: White (Gel coat)
- Mast, Boom, Spillerboom made of Wood (regarding to the current class rules)
- Fittings, stay, shrout, rigging staff stainless steel
- Cabin(rear)wall, Interior Parts, toerail, etc, made of Teak *
- incl. Standard Equipment: 1 manual bilge pump, anchor, 1 anchor line, 4 fender and 4 mooring ropes, 1 bucket, 1 paddle
- Color options: Hull: colored (reg. color overview)
- Deck : white, with colored stripe outside / in the middle (reg. color overview)
- Kajütaufbau : white, with colored walls (reg. color overview)
- Waterline : colored stripe (reg. color overview)
|
- UW-Part: Epoxy Primer Antifouling (reg. color overview)
|
- Halyards diverted to the cockpit, incl. two additional halyard locks and also two winches
|
- Outboard Well, starboard side of aft deck
|
- Cabin windows, two on each side (size 18x 11cm) with frame; brass, chromium plated
|
- Hatch on foredeck, Lewmar Low Profile Typ 30, Size: 39,7 x 52,7 cm
|
Additional Equipment
- Electric installation, incl. 45 AH AGM-Battery, Switch panel with Fuse, Navigation light (two colour front and white rear light with BSH - Certification), additional Top light, removable holder, 12-V Socket near mast hole
- additional cabin lights (one of each side in the main cabin)
- Compass Plastimo Contest 101 mounted on a Board that fit in the companionway
|
- Sails as specified in the Knarr Class rules
- Complete set with Mainsail and Jib
|
- Boom tent (tarpaulin), over Cockpit and coachroof made
|
Interior
- Upholstery for cabin benches (in the main Cabin and on the front berths)
|
- A set of four additional shelves (two in the front and two in the main cabin)
|
- Covering of the inner hull walls with vinyl foam “leather look al like”, floor section incl. cabin roof as a moulded GRP Part
|
|
|
* All visible wooden Parts inside and outside, the rear cabin wall, the Cockpit bench cover, the toerail, floor plank, Traveller Basis, shelves etc. made of Teak / Plywood with Teak surface.
|
