19 | 08 | 2019
Boats and Accessories
General
 
Knarr - a class of it's own ... since 1943

and now in the magazine Yacht Classic

 

Length: 9,28 m   Draft: 1,30 m
Beam: 2,12 m   Displacement: 2.300 kg
      Berths: max. 4
Sail Area: 26,6 qm      
 

One Design Keel Boot Knarr – complete assembled - (as specified in the Knarr Class rules)
  • Hull, Deck, Cockpit und inner sections made of GRP - Standard: White (Gel coat)
  • Mast, Boom, Spillerboom made of Wood (regarding to the current class rules)
  • Fittings, stay, shrout, rigging staff stainless steel
  • Cabin(rear)wall, Interior Parts, toerail, etc, made of Teak *
  • incl. Standard Equipment: 1 manual bilge pump, anchor, 1 anchor line, 4 fender and 4 mooring ropes, 1 bucket, 1 paddle
  • Color options: Hull: colored (reg. color overview)
  • Deck : white, with colored stripe outside / in the middle (reg. color overview)
  • Kajütaufbau : white, with colored walls (reg. color overview)
  • Waterline : colored stripe (reg. color overview)

 

 

  • UW-Part: Epoxy Primer Antifouling (reg. color overview)
  • Halyards diverted to the cockpit, incl. two additional halyard locks and also two winches
  • Outboard Well, starboard side of aft deck
  • Cabin windows, two on each side (size 18x 11cm) with frame; brass, chromium plated
  • Hatch on foredeck, Lewmar Low Profile Typ 30, Size: 39,7 x 52,7 cm


Additional Equipment

 

  • Electric installation, incl. 45 AH AGM-Battery, Switch panel with Fuse, Navigation light (two colour front and white rear light with BSH - Certification), additional Top light, removable holder, 12-V Socket near mast hole
  • additional cabin lights (one of each side in the main cabin)
  • Compass Plastimo Contest 101 mounted on a Board that fit in the companionway
  • Sails as specified in the Knarr Class rules
  • Complete set with Mainsail and Jib
  • Boom tent (tarpaulin), over Cockpit and coachroof made

 

Interior

  • Upholstery for cabin benches (in the main Cabin and on the front berths)
  • A set of four additional shelves (two in the front and two in the main cabin)
  • Covering of the inner hull walls with vinyl foam “leather look al like”, floor section incl. cabin roof as a moulded GRP Part
  • or Covering of the inner hull walls and the cabin roof with thin plywood (Teak i.e.), floor section as a moulded GRP Part



* All visible wooden Parts inside and outside, the rear cabin wall, the Cockpit bench cover, the toerail, floor plank, Traveller Basis, shelves etc. made of Teak / Plywood with Teak surface.

 

bootswerft-schneidereit.de wird überprüft von der Initiative-S
Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
Ok